RC Fusion Surface Prep
FUSION
RC Fusion Surface Prep
- All purpose cleaner for rubber, metal, fiberglass and plastic
RC Fusion Surface Prep is an all-purpose cleaner that can be used on rubber, metal, fiberglass and plastic. It is not recommended for use on urethane or PVC applications. RC Fusion Surface Prep Solvent is used for general surface preparation of BOTH conveyor belt cold (chemical) & vulcanized splices when TCE (Trichloroethylene) solvent or HST (Toluene) solvent is not allowed.
Why Is Almex Different?
-based on petroleum-based solvents
-no oily residue
-lower toxicity
Features and Product Information
Features
- Specifically formulated for the rubber fabrication and conveyor splicing industry
- RC Fusion Surface Prep Solvent is based on petroleum-based solvents
- Very pure solvent
- Will not leave behind an oil residue, which can inhibit or prevent sufficient adhesion
- Less toxic than many similar products on the market
- Use for Natural Rubber (NR), Polyisoprene (IR), Styrene-Butadine (SBR), Polybutadiene (BR), Polychloroprene i.e. Neoprene (CR) rubber belt splices
- Flammable
Product Information
Properties:
Rubber Colour: Clear
Base Polymer: Solvent
Solids (wt.): 0%
Formula: Xylene (60%), Cycholohexane (40%)
Calculated Coverage: 16.6 M² (288 ft.²)
Flash Point: -18 °C / 0 °F
Storage: Store in a cool, dry, well-ventilated area away from heat, direct sunlight, hot metal surfaces and all sources of ignition.
Specifications
| Product Code | Weight (Metric/Imperial) |
|---|---|
| CH-RC-Q | 900 gr / 2.0 Lbs. |
| CH-RC-G | 3.6 Kg / 8.0 Lbs. |
| CH-RC-5G | 18 Kg / 40 Lbs. |
Accessories
Curved Hand Rasp
Curved Hand Rasp
Brass Wire Wheel - 76 mm (3")
Brass Wire Wheel - 76 mm (3")
Flat White Bristle Cement Brush - 2"
Flat White Bristle Cement Brush - 2"
Foxtail Dust Brush
Foxtail Dust Brush
Almex Work Gloves
Almex Work Gloves
Related Items
