RAB Frame Vulcanizing Press
ALMEX_IN_A_BOX
RAB Frame Vulcanizing Press
- 2 piece frame = quick field setup
- Hinged bolts - #1 overland belt splicing press
Customized and rugged, these two-piece frame presses offer simplified assembly, reducing set-up time. Rhombic (RAB) frame presses are well-suited for large, open sites. Use for on-site splice stations or where overhead cranes are available.
Why Is Almex Different?
- A two piece welded aluminum frame
- Quick setup in the field
- Bolts can retract and store in the frame (optional)
Features and Product Information
Features
- Open 2 or Open 4 side configuration
- Can accommodate all belt widths
- 22-degree bias
- Signature Almex "Pressure Bag" uniform pressure system
- Custom "Extruded Plank" cooling system within platens
- Durable "Silicone Element" heating system, custom designed to voltage phase and cycle
- Exceptional remote digital control
- Accurate temperature control and indication
- Can be aligned side-by-side for longer splice areas and easier handling
- Operating pressures of 7kg/cm² (100 psi) to 14kg/cm² (200 psi)
- Temperature Control Panels available with ground fault and ground continuity monitoring
- Lower platen restraint
Product Information
OPTIONS:
- Retractable bolts, stored in-frame
- Custom daylight
Specifications
FRAME
- With rugged welded construction, the upper and lower frames of the press are ideal for both field applications in various mining environments and repetitive shop use
- The fitted rings and brackets allow this frame press to be positioned over splice areas with an overhead crane
- The top and bottom frames secure around the splice with our unique bolt/nut system
- A bolt retraction system, with the bars storing in the frame when not in use, is available as an option
PLATENS
- Each frame press is constructed with aluminum flexible platens that contour to the conveyor belt surface during splicing
- Platens are individually designed and include extruded plank, silicone heating elements-heating up to 163 °C / 325 °F, and durable composite insulating packaging
- Sturdy electrical connectors and moisture-proof latches enhance press durability and longevity
- Lower platen restraint to hold the platen in place when removing the cured belt
PRESSURE/COOLING
SUITABLE PUMPS:
- HP25MAX
- HPP20-4
- HPPC20-4
- HPPC100
- HPPC300
- HPPC-500
GROUND FAULT:
- HP25MAX-GF
- HPP20-4-GF
- HPPC20-4-GF
- Optional pressure pump and reservoirs are required for operating pressures above 7kg /cm² (100 psi). Pumps have optional cooling options
CONTROL PANEL
SUITABLE CONTROLS:
- T6
- SG1
GROUND FAULT:
- T4-GF1 (BOTE)
- T4-GF2 (BOTE)
- T4P-GF1 (AS/NZS)
- T4P-GFIU (AS/NZS)
- T6GFXP
Case Studies
Configurations
Accessories
T6
T6
Fabric Belt Splice Kit
Fabric Belt Splice Kit
Fabric Belt Splicing Tool Kit
Fabric Belt Splicing Tool Kit
Belt Cutting Saw HBSC-001
Belt Cutting Saw HBSC-001
EPDM Splice Kit
EPDM Splice Kit
Related Items